PM135

The PM135 is a multifunctional three-phase power meter with basic revenue metering, power quality and harmonics analysis. (It) provides a cost-effective substitute for numerous analog meters used by industrial, commercial and utility customers for basic power metering. The PM135 is widely integrated in panel boards and SCADA systems. With the addition of the unique TOU module, the EH model answers the needs of revenue metering applications. It is also suitable for utility substation automation with its support of the industry standard DNP 3.0, Modbus RTU and IEC 60870-5-101/104 protocols, as well as its I/O capabilities (using the Digital Input/Output modules). The PM135 series consists of two basic models providing digital measurements of more than 80 electrical parameters locally, and more than 100 electrical parameters via RS-485 interface. The PM135 has a 3x2" / 76x49mm backlit LCD display as well as SATEC's unique bar graph loading indicator.

  • 5" Monochrome Graphic LCD display enabling easy reading of local meters, and can be provided in different languages
  • Standard RS-485 communication port and a second optional Ethernet, PROFIBUS or RS-232/RS-422/RS-485 port. These ports allow local and remote automatic meter readings and setup through the supplemental communication or user data acquisition software
  • Different communication options for remote communications with the meter. These options enable LAN and Internet communication with the unit.
  • 3 voltage inputs and 3 current transformer-isolated AC inputs for direct connection to power line or via potential and current transformers
  • True RMS, volts, amps, power, power factor, neutral current, voltage and current unbalance, frequency
  • Ampere/Volt demand meter
  • 25/50/60/400 Hz measurement capabilities
  • Class 0.5S IEC 62053-22 four-quadrant active and reactive energy polyphase static meter
  • Three-phase total and per phase energy measurements; active, reactive and apparent energy counters
  • Time-of-Use, 4 totalization and tariff energy/demand registers x 8 tariffs, 4 seasons x 4 types of days, 8 tariff changes per day
  • One–time easy programmable tariff calendar schedule
  • Automatic daily energy and maximum demand profile log for total and tariff registers
  • Voltage and current THD, current TDD and K-Factor, up to 40th order harmonic
  • Voltage and current harmonic spectrum and angles
  • Real-time “scope mode” waveform monitoring capability
  • Simultaneous 6-channel one-cycle waveform capture at a rate of 64 samples per cycle
  • Embedded programmable controller
  • 16 control set points; programmable thresholds and delays
  • Relay output control
  • 1-cycle response time
  • Non-volatile memory for long-term event and data recording
  • Event recorder for logging internal diagnostic events and setup changes
  • Two data recorders; programmable data logs on a periodic basis; automatic daily energy and maximum demand profile log
  • Optional four digital inputs with 1-ms scan time; automatic recording of last five digital input change events with timestamps
  • Optional two relay outputs with 1-cycle update time; unlatched, latched, pulse and KYZ operation; energy pulses
  • 3.5 inch Monochrome Graphic LCD display with 240 x 128 dots resolution, adjustable update time backlit and user defined brightness setting
  • Auto-scroll option with adjustable page exposition time; auto-return to a default page
  • LED bar graph showing percent load with respect to user-definable nominal load current
  • Multi-purpose AC/DC power supply (85-265V AC, 88-290 DC)
  • Direct voltage measurement of up to 690v
  • Selection of current input connections:
    • 5A – measurement of up to 10A using conventional 5A CTs
    • 1A – measurement of up to 2A using conventional 1A CTs
    • 1ARS5 – allowing connection remotely of 5A conventional CTs with split core remote Sensors
    • HACS - selection of remote sensors up to 1200A with built in shorting circuit and class 0.5s system accuracy (meter plus CTs)
  • Dual panel mounting: 4" Round; Square 96x96 DIN
  • Weight: 1.5 lbs / 0.7 kg
  • H×W×D: 4.5×4.5×4.3" / 114×114×109 mm
  • Operating temperature: 30 C to 60 C (-22 F to 140 F)
  • Humidity: 0 to 95% RH non condensing
  • Operating Range: 690V AC line to line, 400V AC line to neutral
  • Direct Input and input via PT: up to 790V AC line to line, up to 460V AC line to neutral
  • Modbus RTU
  •  ASCII
  •  DNP3.0

Interested in Multi-function Meter - PM135?

Contact or Send us your requirement today!
TOP